Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Share ideas, best practices, ask questions. No ads here.
Post Reply
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

Anyone know how to get screen working in a scania?
Or why it would just give up? Was working earlier.
Not too worried cos I'll probably have a different 1 tomorrow, just kinda annoying 😆
& yeah I've tried just pressing the button & holding it down. Pressed ever other button too but nothing.
Attachments
Picture.jpg
Picture.jpg (98.82 KiB) Viewed 463 times
Nunesco
Posts: 4
Joined: Tue Jan 17, 2023 4:32 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Nunesco »

Press and hold left dial ?
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

Nunesco wrote: Fri Jan 20, 2023 5:24 pm Press and hold left dial ?
just edited it to say I've tried that
Nunesco
Posts: 4
Joined: Tue Jan 17, 2023 4:32 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Nunesco »

Klarkey wrote: Fri Jan 20, 2023 5:26 pm
Nunesco wrote: Fri Jan 20, 2023 5:24 pm Press and hold left dial ?
just edited it to say I've tried that
oh sorry, don’t know then. Hope you can sort it.
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

Nunesco wrote: Fri Jan 20, 2023 5:26 pm
Klarkey wrote: Fri Jan 20, 2023 5:26 pm
Nunesco wrote: Fri Jan 20, 2023 5:24 pm Press and hold left dial ?
just edited it to say I've tried that
oh sorry, don’t know then. Hope you can sort it.
I literally changed it just before you commented 😆
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

Gavintage wrote: Fri Jan 20, 2023 5:27 pm Fuse maybe 🤔
maybe, know where they are?
Luptoney
Posts: 7
Joined: Thu Jan 19, 2023 10:04 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Luptoney »

Klarkey wrote: Fri Jan 20, 2023 5:28 pm
Gavintage wrote: Fri Jan 20, 2023 5:27 pm Fuse maybe 🤔
maybe, know where they are?
passenger side top of dash
Gavintage
Posts: 7
Joined: Thu Jan 19, 2023 5:51 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Gavintage »

Klarkey wrote: Fri Jan 20, 2023 5:28 pm
Gavintage wrote: Fri Jan 20, 2023 5:27 pm Fuse maybe 🤔
maybe, know where they are?
under dash normally passenger side 🤷🏻‍♂️
Derekkai
Posts: 8
Joined: Fri Jan 20, 2023 5:31 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Derekkai »

Klarkey wrote: Fri Jan 20, 2023 5:28 pm
Gavintage wrote: Fri Jan 20, 2023 5:27 pm Fuse maybe 🤔
maybe, know where they are?
fuse 151. In fuse box ,passenger foot well. Take cover off and its on right as you look at it.
Rhystero
Posts: 2
Joined: Fri Jan 20, 2023 5:32 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Rhystero »

Derekkai wrote: Fri Jan 20, 2023 5:31 pm
Klarkey wrote: Fri Jan 20, 2023 5:28 pm
Gavintage wrote: Fri Jan 20, 2023 5:27 pm Fuse maybe 🤔
maybe, know where they are?
fuse 151. In fuse box ,passenger foot well. Take cover off and its on right as you look at it.
pull this and put it back in.. normally works for me
Derekkai
Posts: 8
Joined: Fri Jan 20, 2023 5:31 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Derekkai »

Rhystero wrote: Fri Jan 20, 2023 5:33 pm
Derekkai wrote: Fri Jan 20, 2023 5:31 pm
Klarkey wrote: Fri Jan 20, 2023 5:28 pm

maybe, know where they are?
fuse 151. In fuse box ,passenger foot well. Take cover off and its on right as you look at it.
pull this and put it back in.. normally works for me
same here bud
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

Derekkai wrote: Fri Jan 20, 2023 5:34 pm
Rhystero wrote: Fri Jan 20, 2023 5:33 pm
Derekkai wrote: Fri Jan 20, 2023 5:31 pm

fuse 151. In fuse box ,passenger foot well. Take cover off and its on right as you look at it.
pull this and put it back in.. normally works for me
same here bud
am I being blind or there is no 151? 🤔
Attachments
Image.jpg
Image.jpg (184.53 KiB) Viewed 436 times
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

Derekkai wrote: Fri Jan 20, 2023 5:34 pm
Rhystero wrote: Fri Jan 20, 2023 5:33 pm
Derekkai wrote: Fri Jan 20, 2023 5:31 pm

fuse 151. In fuse box ,passenger foot well. Take cover off and its on right as you look at it.
pull this and put it back in.. normally works for me
same here bud
sorted, 155 it was. Looked fine but swapped with another 15 that was fine too 😊
Derekkai
Posts: 8
Joined: Fri Jan 20, 2023 5:31 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Derekkai »

Klarkey wrote: Fri Jan 20, 2023 5:35 pm
Derekkai wrote: Fri Jan 20, 2023 5:34 pm
Rhystero wrote: Fri Jan 20, 2023 5:33 pm

pull this and put it back in.. normally works for me
same here bud
sorted, 155 it was. Looked fine but swapped with another 15 that was fine too 😊
sorry just read this. Glad you sorted it
Neiiradef
Posts: 8
Joined: Tue Jan 17, 2023 11:37 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Neiiradef »

Try the battery isolator?
MortimMr
Posts: 6
Joined: Fri Jan 20, 2023 5:37 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by MortimMr »

Keys out, then start back up?
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

MortimMr wrote: Fri Jan 20, 2023 5:37 pm Keys out, then start back up?
nothing. Was delivering at tesco then came out and nothing happened, tried buttons and stuff since but still nothing
MortimMr
Posts: 6
Joined: Fri Jan 20, 2023 5:37 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by MortimMr »

Klarkey wrote: Fri Jan 20, 2023 5:38 pm
MortimMr wrote: Fri Jan 20, 2023 5:37 pm Keys out, then start back up?
nothing. Was delivering at tesco then came out and nothing happened, tried buttons and stuff since but still nothing
just report when you get back and hope you don’t get the same wagon again 😉
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

MortimMr wrote: Fri Jan 20, 2023 5:41 pm
Klarkey wrote: Fri Jan 20, 2023 5:38 pm
MortimMr wrote: Fri Jan 20, 2023 5:37 pm Keys out, then start back up?
nothing. Was delivering at tesco then came out and nothing happened, tried buttons and stuff since but still nothing
just report when you get back and hope you don’t get the same wagon again 😉
sorted now, finished my deliveries so something to waste time 😆
Charlesto
Posts: 5
Joined: Sun Jan 01, 2023 4:27 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Charlesto »

Check the fuses, little radio sign on the diagram pull refit I'm sure there's 2 fuses that can control power to radio, ours are forever freezing the screen
Matthen
Posts: 10
Joined: Thu Jan 19, 2023 6:53 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Matthen »

Looks like a fuse has blown is everything else working I have the same truck and mine done this and it was a fuse.
Smithru
Posts: 7
Joined: Thu Jan 19, 2023 10:27 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Smithru »

Turn the brightness back up
Gareents
Posts: 7
Joined: Fri Jan 20, 2023 5:45 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Gareents »

Pull the fuse out and put it back in happened when I had a scania
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

Wooo, cheers guys 😊🍻
Attachments
Picture.jpg
Picture.jpg (166.98 KiB) Viewed 417 times
Bryance
Posts: 4
Joined: Thu Jan 19, 2023 10:54 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Bryance »

Klarkey wrote: Fri Jan 20, 2023 5:46 pm Wooo, cheers guys 😊🍻
How you manage to fix it?
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

Bryance wrote: Fri Jan 20, 2023 5:46 pm
Klarkey wrote: Fri Jan 20, 2023 5:46 pm Wooo, cheers guys 😊🍻
How you manage to fix it?
took fuse out then put it back in 😆
Ashworbi
Posts: 6
Joined: Thu Jan 19, 2023 10:41 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Ashworbi »

It’s a scania. Their sh*te.
Colinx
Posts: 5
Joined: Fri Jan 20, 2023 5:49 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Colinx »

Ashworbi wrote: Fri Jan 20, 2023 5:47 pm It’s a scania. Their sh*te.
"They're".....just saying
ReeceFix
Posts: 3
Joined: Fri Jan 20, 2023 5:51 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by ReeceFix »

Had this before, was a fuse. Apparently it’s common
BagottGuy
Posts: 4
Joined: Thu Jan 19, 2023 6:24 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by BagottGuy »

Power button needs held for about 30 seconds...
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

BagottGuy wrote: Fri Jan 20, 2023 5:53 pm Power button needs held for about 30 seconds...
tried that. Pulled fuse then put it back in & sorted it 🙂
Stepho62
Posts: 3
Joined: Fri Jan 20, 2023 5:54 pm

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Stepho62 »

While on this man only got half a screen
Klarkey
Posts: 13
Joined: Thu Jan 19, 2023 9:19 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Klarkey »

Stepho62 wrote: Fri Jan 20, 2023 5:55 pm While on this man only got half a screen
try pull the fuse, was 155 on mine. Fuse looked fine, swapped it with another 15a fuse that also looked fine (probably don't need to swap) then try. Do this with ignition off obviously just incase🙂
If not I'm not sure. Mine was only on like 25k miles, 71 plate so dunno what's wrong with it 🤷
Hemslenn
Posts: 6
Joined: Thu Jan 19, 2023 10:56 am

Re: Anyone know how to get screen working in a scania? Or why it would just give up? Was working earlier. Not too

Post by Hemslenn »

Turn kill switch off and back on
Post Reply

Return to “HGV truck drivers | General discussions”

Who is online

Users browsing this forum: No registered users and 1 guest